Struct rgb::alt::GrayAlpha

#[repr(C)]pub struct GrayAlpha<ComponentType, AlphaComponentType = ComponentType>(pub ComponentType, pub AlphaComponentType);

Grayscale with alpha. Use .0/.1 to access.

Implementations

impl<T: Clone, A> GrayAlpha<T, A>

pub fn gray(&self) -> Gray<T>

Copy Gray component out of the GrayAlpha struct

impl<T, A> GrayAlpha<T, A>

pub fn new(brightness: T, alpha: A) -> Self

New grayscale+alpha pixel

pub fn gray_mut(&mut self) -> &mut Gray<T>

Provide a mutable view of only Gray component (leaving out alpha).

impl<T: Copy, A: Clone> GrayAlpha<T, A>

pub fn alpha(&self, a: A) -> Self

Create a new GrayAlpha with the new alpha value, but same gray value

pub fn map_alpha<F, B>(&self, f: F) -> GrayAlpha<T, B> where
    F: FnOnce(A) -> B, 

Create a new GrayAlpha with a new alpha value created by the callback.

pub fn map_gray<F, U, B>(&self, f: F) -> GrayAlpha<U, B> where
    F: FnOnce(T) -> U,
    U: Clone,
    B: From<A> + Clone, 

Create new GrayAlpha with the same alpha value, but different Gray value

Trait Implementations

impl<T: Add, A: Add> Add<GrayAlpha<T, A>> for GrayAlpha<T, A>

px + px

type Output = GrayAlpha<<T as Add>::Output, <A as Add>::Output>

The resulting type after applying the + operator.

fn add(self, other: GrayAlpha<T, A>) -> Self::Output

Performs the + operation.

impl<T> Add<T> for GrayAlpha<T> where
    T: Copy + Add<Output = T>, 

px + 1

type Output = GrayAlpha<T>

The resulting type after applying the + operator.

fn add(self, r: T) -> Self::Output

Performs the + operation.

impl<T, A> AddAssign<GrayAlpha<T, A>> for GrayAlpha<T, A> where
    T: Add<Output = T> + Copy,
    A: Add<Output = A> + Copy, 

px + px

fn add_assign(&mut self, other: GrayAlpha<T, A>)

Performs the += operation.

impl<T> AddAssign<T> for GrayAlpha<T> where
    T: Copy + Add<Output = T>, 

px + 1

fn add_assign(&mut self, r: T)

Performs the += operation.

impl<T> AsMut<T> for GrayAlpha<T>

fn as_mut(&mut self) -> &mut T

Performs the conversion.

impl<T> AsPixels<GrayAlpha<T, T>> for [T]

fn as_pixels(&self) -> &[GrayAlpha<T>]

Reinterpret the slice as a read-only/shared slice of pixels. Multiple consecutive elements in the slice are intepreted as a single pixel (depending on format, e.g. 3 for RGB, 4 for RGBA).

fn as_pixels_mut(&mut self) -> &mut [GrayAlpha<T>]

Reinterpret the slice as a mutable/exclusive slice of pixels. Multiple consecutive elements in the slice are intepreted as a single pixel (depending on format, e.g. 3 for RGB, 4 for RGBA).

impl<T> AsRef<T> for GrayAlpha<T>

fn as_ref(&self) -> &T

Performs the conversion.

impl<ComponentType: Clone, AlphaComponentType: Clone> Clone for GrayAlpha<ComponentType, AlphaComponentType>

fn clone(&self) -> GrayAlpha<ComponentType, AlphaComponentType>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T: Copy, B> ComponentMap<GrayAlpha<B, B>, T, B> for GrayAlpha<T>

fn map<F>(&self, f: F) -> GrayAlpha<B> where
    F: FnMut(T) -> B, 

Convenience function (equivalent of self.iter().map().collect()) for applying the same formula to every component.

impl<T> ComponentSlice<T> for GrayAlpha<T>

fn as_slice(&self) -> &[T]

The components interpreted as an array, e.g. one RGB expands to 3 elements.

fn as_mut_slice(&mut self) -> &mut [T]

The components interpreted as a mutable array, e.g. one RGB expands to 3 elements.

impl<ComponentType: Copy, AlphaComponentType: Copy> Copy for GrayAlpha<ComponentType, AlphaComponentType>

impl<ComponentType: Debug, AlphaComponentType: Debug> Debug for GrayAlpha<ComponentType, AlphaComponentType>

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl<ComponentType: Default, AlphaComponentType: Default> Default for GrayAlpha<ComponentType, AlphaComponentType>

fn default() -> GrayAlpha<ComponentType, AlphaComponentType>

Returns the "default value" for a type.

impl<T> Div<T> for GrayAlpha<T> where
    T: Copy + Div<Output = T>, 

px / 1

type Output = GrayAlpha<T>

The resulting type after applying the / operator.

fn div(self, r: T) -> Self::Output

Performs the / operation.

impl<T> DivAssign<T> for GrayAlpha<T> where
    T: Copy + Div<Output = T>, 

px * 1

fn div_assign(&mut self, r: T)

Performs the /= operation.

impl<ComponentType: Eq, AlphaComponentType: Eq> Eq for GrayAlpha<ComponentType, AlphaComponentType>

impl<T: Copy> From<Gray<T>> for GrayAlpha<T, u8>

Assumes 255 is opaque

fn from(other: Gray<T>) -> Self

Performs the conversion.

impl<T: Copy> From<Gray<T>> for GrayAlpha<T, u16>

Assumes 65535 is opaque

fn from(other: Gray<T>) -> Self

Performs the conversion.

impl<T: Clone, A> From<GrayAlpha<T, A>> for RGBA<T, A>

fn from(other: GrayAlpha<T, A>) -> Self

Performs the conversion.

impl<ComponentType: Hash, AlphaComponentType: Hash> Hash for GrayAlpha<ComponentType, AlphaComponentType>

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given [Hasher].

fn hash_slice<H>(data: &[Self], state: &mut H) where
    H: Hasher, 

Feeds a slice of this type into the given [Hasher].

impl<T> Mul<T> for GrayAlpha<T> where
    T: Copy + Mul<Output = T>, 

px * 1

type Output = GrayAlpha<T>

The resulting type after applying the * operator.

fn mul(self, r: T) -> Self::Output

Performs the * operation.

impl<T> MulAssign<T> for GrayAlpha<T> where
    T: Copy + Mul<Output = T>, 

px * 1

fn mul_assign(&mut self, r: T)

Performs the *= operation.

impl<ComponentType: Ord, AlphaComponentType: Ord> Ord for GrayAlpha<ComponentType, AlphaComponentType>

fn cmp(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> Ordering

This method returns an [Ordering] between self and other.

#[must_use]fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

#[must_use]fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

#[must_use]fn clamp(self, min: Self, max: Self) -> Self

🔬 This is a nightly-only experimental API. (clamp)

Restrict a value to a certain interval.

impl<ComponentType: PartialEq, AlphaComponentType: PartialEq> PartialEq<GrayAlpha<ComponentType, AlphaComponentType>> for GrayAlpha<ComponentType, AlphaComponentType>

fn eq(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests for !=.

impl<ComponentType: PartialOrd, AlphaComponentType: PartialOrd> PartialOrd<GrayAlpha<ComponentType, AlphaComponentType>> for GrayAlpha<ComponentType, AlphaComponentType>

fn partial_cmp(
    &self,
    other: &GrayAlpha<ComponentType, AlphaComponentType>
) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &GrayAlpha<ComponentType, AlphaComponentType>) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T, A> Pod for GrayAlpha<T, A> where
    T: Pod,
    A: Pod, 

impl<ComponentType, AlphaComponentType> StructuralEq for GrayAlpha<ComponentType, AlphaComponentType>

impl<ComponentType, AlphaComponentType> StructuralPartialEq for GrayAlpha<ComponentType, AlphaComponentType>

impl<T: Sub, A: Sub> Sub<GrayAlpha<T, A>> for GrayAlpha<T, A>

px - px

type Output = GrayAlpha<<T as Sub>::Output, <A as Sub>::Output>

The resulting type after applying the - operator.

fn sub(self, other: GrayAlpha<T, A>) -> Self::Output

Performs the - operation.

impl<T> Sub<T> for GrayAlpha<T> where
    T: Copy + Sub<Output = T>, 

px - 1

type Output = GrayAlpha<<T as Sub>::Output>

The resulting type after applying the - operator.

fn sub(self, r: T) -> Self::Output

Performs the - operation.

impl<T, A> SubAssign<GrayAlpha<T, A>> for GrayAlpha<T, A> where
    T: Sub<Output = T> + Copy,
    A: Sub<Output = A> + Copy, 

px - px

fn sub_assign(&mut self, other: GrayAlpha<T, A>)

Performs the -= operation.

impl<T> SubAssign<T> for GrayAlpha<T> where
    T: Copy + Sub<Output = T>, 

px - 1

fn sub_assign(&mut self, r: T)

Performs the -= operation.

impl<T, A> Sum<GrayAlpha<T, A>> for GrayAlpha<T, A> where
    T: Default + Add<Output = T>,
    A: Default + Add<Output = A>, 

fn sum<I: Iterator<Item = Self>>(iter: I) -> Self

Method which takes an iterator and generates Self from the elements by "summing up" the items.

impl<T, A> Zeroable for GrayAlpha<T, A> where
    T: Zeroable,
    A: Zeroable, 

fn zeroed() -> Self

Calls zeroed.